The BANSHEE Rifle Plate Carrier was designed to meet and exceed the needs of the operator. If you are an Operator, Military and Law Enforcement alike who needs a high quality carrier that has great load carrying capacity in a compact lightweight design the BANSHEE is for you. The Shoulders on the BANSHEE rifle plate carrier are fully adjustable and padded with a new advanced design feature not seen in other rigs. The shoulder areas once adjusted slides into itself and locks in securely with a hidden quick release buckle. On the shoulders are 2 rows of PALS webbing with elastic nylon sewn in between the PALS webbing allowing for comms or hydration tubing to be ran through. The front and back of the BANSHEE feature 5 rows of PALS webbing and two 2 inch rows of Loop sewn on for flags and other identifiers. The sides of the rig have fully adjustable nylon strapping with a quick release buckle and the front and back of the panels are also padded. The rifle plates are loaded from the bottom front/back and secured with a hook/loop closure.

The BANSHEE features a removable Cummerbund that runs through the rig, is fully adjustable (one size fits most) and has PALS webbing. The Cummerbund if not needed can also be removed, and the rig can continue to be secured by the quick release buckles. The front of the Plate Carrier also has a hook and loop pocket to allow for accessories.

Will accept up to 10x12 Level 3 and 4 ESAPI OR SIMILAR PLATES and Plate Backers. Currently, the pockets will not accept the XL ESAPI plates.- (Accessories including side plate pockets shown in pictures not included with product)

BANSHEE now with Drag Handle and the interior of removable cummerbund has PALS webbing to accept Molle side plate pockets.

Side plate pockets, shoulder pads, and kangaroo pouch now available to accessorize your BANSHEE

Specs:

* The most advanced plate carrier to outperform anything on the market and withstand whatever you throw at it.
* Extreme versatility with several PALS web attachment points covering the front, back and shoulders of the vest.
* Fully adjustable and padded front, back and shoulder areas.
* Two rows of loop for identifiers
* Fits over soft body armor/Uniforms
* Heavy Duty bartacking at key stress points
* Wire, antenna or hydration hose guides
* Removable Cummerbund (UPDATED)
* Low Profile/ Lightweight
* Quick Release Buckle closure and wrap around removable cummerbund
* 1000 Cordura
* Drag Handle- New
* Accepts side plate pockets- New
* Dimensions of the Cummerbund each side that accepts soft armor 17in x 6in
* Weight of the BANSHEE empty 2lbs 5 oz
* Made in the USA
* Lifetime Warranty
* Will accept up to 10x12 Level 3 and 4 ESAPI OR SIMILAR PLATES and Plate Backers with clipped corners(shooters cut). Currently, the pockets will not accept the XL ESAPI plates.

Great Rig Richard Dembroski (Chugiak , AK) 11/23/2011 5:48 PM Well built is an understatement. fit and finish is excellent, wearability is high. Never having had a chest rig like this took some getting use to but as long as I wear a soft shell coat under it its good to go . tends to ride a bit high with no plates in it. I know it will drop with weight on it. easy to get on and off and adjust . Love the drag handle , just hope noone has to use it with me wearing it .

Great Carrier Eric Hutchins (Vermont) 11/17/2011 8:25 AM I have only had this carrier for about 3 months now, but it was the best item i have ever bought. its small, light, and sits perfectly on a small frame. The only issue i have had is when it is fully weighted down with gear and ESAPI plates, the shoulder straps like to walk themselves out, but im talking half an inch in three months. its easily solved by taping them where you want. other than that one little thing, the carrier is butilt like a tank, and you get a lot more for your money. Great carrier!!

Great Carrier BUT Robert Dare (Kelso, WA) 6/21/2011 3:41 PM Fit properly...just sat a tad bit to high on the chest, but I'm sure magazines will weigh it down to the desirable level. The cumberbunder was a bit of a pain but i had to rewire it to my specs. Not a biggy. excellent construction. I'll have to add plates to see what it is really made of. I just wish this carrier had the option for soft armor built into it or the ability to put soft armor throughout the whole carrier.

Great Carrier but no side plate capability Jared (Afghanistan) 4/16/2011 4:11 AM I bought this carrier abouth a month ago and received it at my AFG APO in 15 days - real fast! I love the carrier but the only down side is that it cannot accept the standard issue side plates. I purcharsed the side plate carriers from Tactical Tailor and the Coyote Tan colors match perfectly. There is plenty of MOLLE and I enjoy its compact size (I wear a small IBA/IOTV). The MOLLE/elastic along the shoulders works great for routing MBITR wires/antennas/ear pieces. It is easily adaptable between the cumberbund and a fastex buckle attachment. I highly recommend this carrier to others and have received several complements on this carrier.